CVSA International Roadside DOT Inspection Readiness (2020)

DOT Inspection

2020 DOT Inspection Readinessnow
re-scheduled for Sept. 9-11

The annual International Roadcheck—conducted by the Commercial Vehicle Safety Alliance (CVSA) in late this year—is a high-visibility reminder of the importance of commercial motor vehicle safety. The 2020 International Roadcheck is now scheduled for Sept. 9-11.

Let’s review a few important notes and changes for the 2020 International Roadcheck.

Date change for 2020 International Roadcheck

Historically, the International Roadcheck has happened the first week of June. In 2020, the DOT inspection dates planned to have been moved up a month to take advantage of potentially more favorable weather conditions.

This year, the CVSA’s International Roadcheck was supposed to happen May 5-7, 2020, but was cancelled due to the coronavirus pandemic, and is now re-scheduled for Sept. 9-11.

Law enforcement will also be paying closer attention to unsafe driving behaviors of both truck and car drivers July 12-18 as part of the CVSA Operation Safe Driver Week.

In July, more than 10,000 citations, warnings issued to truckers during Operation Safe Driver Week, mostly for speeding and seat belts.

Also, the annual Brake Safety Week enforcement blitz is scheduled for August 23-29, 2020 with no plans of being postponed this year.

“During last year’s International Roadcheck inspection and enforcement initiative, brake system and brake adjustment violations accounted for 45.1% of all out-of-service conditions. That’s more than any other vehicle violation category. And during last year’s Brake Safety Week, 13.5% of the commercial motor vehicles inspected had brake-related vehicle inspection item violations and were placed out of service,” the CVSA statement reported.

DOT inspection focus for 2020 International Roadcheck

Primarily, the International Roadcheck conducts the North American Standard (NAS) Level I Inspection, which includes 37 steps in two main inspection categories:

  • driver operating requirements
  • vehicle mechanical fitness
  • Note: hazardous materials/dangerous goods are sometimes part of a Level I inspection

Depending on other factors, an inspector could conduct a:

  • Level II inspection (walk-around driver/vehicle)
  • Level III inspection (driver/credential/administrative) and/or
  • Level IV inspection (vehicle-only)

Each year, there is also a special category focus. This year’s now-postponed Roadcheck focus is on the driver requirements category.

This includes driver CDLs, medical cards, seat belts, records of duty status, ELD compliance and more – during the 72-hour ramp-up in enforcement.

>>> Download 2020 International Roadcheck Driver Requirements <<<

CVSA’s President, Sgt. John Samis of the Delaware State Police, commented that due to the US Federal mandate for electronic logging device compliance, “this year’s International Roadcheck would be the perfect opportunity to revisit all aspects of roadside DOT inspection driver requirements.”

What to expect during the CVSA International Roadcheck

At a minimum, drivers should anticipate the following procedures during a roadside DOT inspection:

  • inspector greeting, interview, driver preparation
  • collection/verification of driver documents
  • motor carrier ID
  • license examination
  • records check (duty status and periodic inspection reports)
  • certification check (if needed)
    • Medical Examiner’s Certificate
    • Skill Performance Evaluation Certification, and
    • daily vehicle inspection report
  • other inspections such as driver seat belt usage, illness, fatigue, impairments due to substance use

A roadside DOT inspection would include critical components such as:

  • brake systems
  • cargo securement
  • coupling devices
  • driveline/driveshaft components
  • driver’s seat (missing)
  • exhaust systems
  • frames
  • fuel systems
  • lighting devices
  • steering mechanisms
  • suspension system
  • tires
  • van and open-top trailer bodies
  • wheels, rims, and hubs
  • windshield wipers
  • Buses, motor coaches, passenger vans or other passenger-carrying vehicles: emergency exits, electrical cables and systems in engine and battery compartments, and temporary and aisle seating

Although this 3-day event spanning from Canada to Mexico intensifies the frequency of inspections, it’s crucial to remember that DOT inspections happen every day of the year.

The FMCSA 2019 data reports 3.36 million inspections last year, with only 67,072 (or, about 2%) happening during the International Roadcheck. The annual data show 944,794 driver violations, with just over 20% (195,545) being for out-of-service conditions.

>>> Review the 2019 International Truck Inspection Results <<<

Obeying safety standards and being prepared for inspection at any time of the year is a vital aspect of any driver’s protocol.

What are CVSA Standards for critical violations?

The basis for violations comes from the CVSA North American Standard Out-of-Service Criteria.

There are eight different levels of inspection the CVSA follows. However, truck inspections in the 2019 Roadcheck were only subjected to the North American Standard (NAS) Level I, II and III Inspections.

Out-of-service orders and the number, type and severity of safety violations affect a motor carrier’s Compliance, Safety, Accountability (CSA) score and its Safety Fitness Determination (SFD) rating.


DOT Audits

We can perform a mock audit for you

You can stay ahead of the FMCSA by ensuring your drivers are in compliance before sending them out on the road. We offer many services, but one specifically—DOT Mock Audits—help trucking companies operate with the confidence that they will pass any audits or inspections the FMCSA throws at them.

Basically, in a DOT Mock Audit, we send out a specialist that will conduct an audit in the exact same way a DOT officer would. This can help keep you prepared for any surprise roadside inspection or any future actual DOT audits, and you can be sure that they will happen.

All CNS services are geared toward keeping your trucking company safe and compliant so that you stay on the road and pass all DOT inspections.

For any assistance related to DOT Audits, call (888) 260-9448 or email at info@cnsprotects.com.

CVSA approves drag link welds on Dodge Ram recall


The Commercial Vehicle Safety Alliance (CVSA) recently approved a new inspection bulletin in relation to a recall on the drag link assembly for 2013-2018 Dodge Ram 2500s and Dodge Ram 3500s.

The National Highway Traffic Safety Administration (NHTSA) issued a safety recall report regarding the drag link assembly on 2013-2018 Dodge Ram 2500/3500s.

The CVSA has put the 2019-02 Inspection Bulletin in place to guide the inspection of the drag link assembly on those particular Ram 2500 and 3500 trucks that are subject to roadside inspections.

In accordance with the manufacturer’s approved recall remedy, these vehicles may have the outboard steering linkage jam nuts welded to the adjuster sleeve, which should not be cited as an out-of-service condition.

Drag link assembly
Drag link assembly weld locations for Dodge Ram recall

For the latest Inspection Bulletins, certified roadside inspectors should visit the CVSA’s Inspection Bulletins section to ensure inspections are conducted accurately and using the most up-to-date information.

Stay DOT compliant

It is important to stay up to date on vehicle maintenance, what is checked during an inspection and what can cause you to pass or fail an inspection.

We offer audit services and safety management programs that will ensure you stay in compliance at all times. All of our services are focused on keeping your trucking company safe and compliant so that you stay on the road.

If you have any questions, call (888) 260-9448 or email at info@cnsprotects.com.

CVSA international truck inspection results for 2019


On June 4-6, 2019—as part of the Commercial Vehicle Safety Alliance’s (CVSA) International Roadcheck—67,072 truck inspections were conducted, removing 12,019 vehicles and 2,784 drivers from roads across the US and Canada.

The International Roadcheck is conducted annually and is meant to remove unsafe commercial motor vehicles (CMV) and drivers from roads. During this 72-hour inspection, 17.9% of vehicles and 4.2% of drivers were placed out of service.

The basis for violations comes from the CVSA North American Standard Out-of-Service Criteria.

>>> Prepare for the 2020 CVSA International Roadside DOT Inspection <<<

Inspection levels

There are eight different levels of inspection that the CVSA follows, however the truck inspections in this roadcheck were only subjected to the North American Standard (NAS) Level I, II, and III Inspections.

  • NAS Level I Inspection –includes a 37-step procedure examining the driver operating requirements and vehicle mechanical fitness.
  • NAS Level II Inspection—includes anything that can be inspected without getting under the CMV.
  • NAS Level III Inspection—includes a review of driver requirements, such as the license, cargo and vehicle documentation, record of duty status, seat belt usage, etc.

There were 60,058 Level I, II, and III Inspections conducted in the US and 7,014 in Canada. Respectively, the vehicle and driver out-of-service rate for the US was 17.7% and 4.4% and 19.9% and 2% for Canada.

Inspection focus

Inspections focused on violations related to steering and suspension systems, which resulted in identifying:

  • 408 steering violations or 2.5% of all out-of-service violations
  • 703 suspension violations or 4.3% of all out-of-service violations

Truck inspection results

The results for inspections are summarized below and include out-of-service vehicle, CMV driver, seatbelt, hazardous materials/dangerous goods and motorcoach violations.

There were 16,347 vehicles placed out-of-service with the top violation being for braking systems. The list below summarizes the remainder of recorded vehicle violations.

Out-of-service vehicle violations:

Vehicle violation category Number of violationsPercent of out-of-service violations
Braking systems 4578 28%
Tires and wheels 3156 19.3%
Brake adjustment 2801 17.1%
Cargo securement 1991 12.2%
Lighting devices 1875 11.5%
Suspensions 703 4.3%
Steering mechanisms 408 2.5%
Other 401 2.5%
Frames 170 1%
Coupling devices 124 .8%
Driveline/driveshaft 61 .4%
Fuel systems 44 .3%
Exhaust systems 35 .2%

There were 3,173 drivers placed out-of-service with the top violation being for hours of service. The list below summarizes the remainder of recorded driver violations.

Driver out-of-service violations:

Driver violation categoryNumber of violationsPercent of out-of-service violations
Hours of Service 1,179 37.2%
Wrong Class License 714 22.5%
False Logs 467 14.7%
Other 351 11.1%
Suspended License 232 7.3%
Drugs/Alcohol 99 3.1%
Expired License 94 3%
Violating License Restriction37 1.2%

There were 748 seat belt violations and out of 3,851 CMVs inspected, 527 violations for commercial motor vehicles transporting hazardous materials/dangerous goods with the most common violation being for loading. The list below summarizes the remainder of recorded violations for hazardous materials/dangerous goods.

Hazardous Materials/Dangerous GoodsNumber of violations Percent of out-of-service violations
Loading 7329.9%
Shipping papers 6125%
Placarding 46 18.9%
Markings 31 12.7%
Bulk packaging 15 6.1%
Package integrity 12 4.9%
Other 62.5%

During the International Roadcheck, 823 motorcoaches were inspected with 47 vehicles and 21 drivers being placed out of service. Inspections included a review of emergency exits, electrical cable sand systems in engine and battery compartments and seating.

Out-of-service orders and the number, type and severity of safety violations affect a motor carrier’s Compliance, Safety, Accountability (CSA) score and its Safety Fitness Determination (SFD) rating.

Stay DOT compliant

Knowing what your CSA score is and how it affects your company and all of the requirements to pass inspections, whether it be for brake safety or suspension and steering, will allow you to stay compliant and plan your operations more efficiently.

All CNS services are geared toward keeping your trucking company safe and compliant so that you stay on the road and pass all truck inspections.

If you have any questions, call (888) 260-9448 or email at info@cnsprotects.com.

Landscaper DOT Violations

Landscapers Beware! DOT will be doing spot checks and roadsides this spring and summer looking for trucks and trailers without the proper weight combinations, DOT numbers, medical cards and insurance requirements.  DOT knows this is the time of year that companies avoiding regulation will be out operating.  The DOT is doing more than just occasional checks, they are hunting the non compliant companies.  Don’t wait until your driver is suspended and you have costly fines adding up, because it doesn’t just stop there…  The more your company exposes roadside violations the more likely your company will be picked for a DOT audit.

Common questions and notes for Landscaper Outfits:

 

Remember any PA Intrastate Carriers operating a CMV over 17,001lbs gross vehicle weight rating or combination are required to have a US DOT number.

 

Interstate carriers operating a CMV over 10,001lbs gross vehicle weight rating or combination are required to have a US DOT number.

 

Interstate carriers are required to file their UCR by May 2019.

 

Anyone driving a CMV (vehicle with DOT # on the side) is required to fill out a Driver Qualification File, which basically states that the driver is fit and qualified to drive the CMV.

 

DOT drivers are required to have a medical card.

 

Anyone driving a CMV gvwr or combination weight over 26,001lbs should have a Commercial Drivers License (CDL)

 

All CDL drivers must be enrolled into a random drug and alcohol consortium and have taken a Pre-Employment Drug Test prior to driving for any company or must have been previously enrolled in a Drug and Alcohol Consortium for at least a year or have had a negative drug result within the last 6 months in order to omit the pre-employment test.

 

These are the most common issues discovered during audits for Landscape Outfits .

 

For more questions visit us at : http://www.cnsprotects.com/DOT requirements